Aluform Small Hydraulic Punching ZX-100T-36

 

Features and functions

- The punching machine is used for the aluminium formwork80-600mm U Panel and 100x100-200 G profile holes punching

- The machine body is heat treated to eliminate internalstress and has sufficient strength and rigidity.

- The machine adopt high quality hydraulic station driven,the four-bar linkage mechanism ensures that the slider andthe punching pins are simultaneously working.

- The punching stroke adopts photoelectric control, which iseasy to operate and has high precision.

- The punching pins is free of disassembly, so, the holesdistance is easily set without disassembling the punchingpins, which features high production efficiency and easyoperate.

- The machine have special support system to guide thepunching pin to make sure the pins in the center of thecore, the punching is free of burrs, and the service life ofthe punching pins can be extended to 4-6 months.

- The hydraulic system adopts the latest 40 valve group,increased the pressure-retaining valve and quick valve,improve production efficiency, punching time only 6S.

- The hydraulic system adopts an integrated design to savespace. The use of an adjustable vane pump instead of atraditional plunger pump reduces equipment operatingnoise.

- The hydraulic system has three levels of protection, themain system pressure protection, adjustable electriccontact pressure gauge and travel limitation protection.

- It adopts self-lubricating copper sleeve and automatic oilfilling system also, the time can be adjusted easily.

Technical parameter